DATACARD IMAGECARD M2L DRIVER

You may not modify the coupler or how it is used without the written permission of Datacard. If the PC has more than one serial port, make sure you view the settings for the serial port to which the printer is attached. See Chapter Contact your service representative. When you select a material type, default values for the material are sent to the printer and factory values are erased. Operational settings should be changed only by someone familiar with the operation of the printer and with Windows. Page The rollers might be dirty. Power on the printer to resume card production.

Uploader: Brabei
Date Added: 10 March 2016
File Size: 50.87 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 18240
Price: Free* [*Free Regsitration Required]

To order more overlay material, contact your service provider.

DataCard ImageCard User Manual

Push the bottom of the card cartridge until it clicks into place. Usually it trancate the images and the data.

Printhead cartridge The Magna Class printer has a replaceable printhead. If you have installed the printer driver and want to update to the Page A short edge imageard the topcoat does not stick to the card. Maintaining the printer Replacing the printhead cartridge The Magna Class printer uses an operator-replaceable printhead cartridge.

Don’t have an account? Physical requirements The Magna Class printer requires an environment that accommodates its physical dimensions and weight.

Datacard Imagecard M2

The following describes the overlay materials you can use: Page See Chapter Clean the heated roller. A short edge of the topcoat does not stick to the card.

Clear and secure topcoat for use in datacard desktop card printers 1 page.

Power button Use the power button to power on or power off the printer. Close the Release Notes when you have viewed the information. Answered on Nov 21, From the Windows Start menu, select Settings and then Printers.

Datacard Cleaning Cards.

The push latch will release the swing arm. Answered on Oct 13, Depending on the module installed in the printer, contact-type, contactless, or both types of smart card chips can be programmed. Recent Popular Answered Unanswered.

Answered on Sep 09, Got it, continue to print. Load The Print Ribbon Grasp the ribbon cartridge handle, and lift up to remove the ribbon cartridge see Load the print ribbon If used print ribbon is in the printer, remove the used ribbon and used ribbon spool from the ribbon cartridge shafts.

Datacard ImageCard M2L

If the PC has more than one serial port, make sure you view the settings for the serial port to which the printer is attached. You can see the message and view help, which guides you in resolving the situation.

If needed, move it gently to seat it. If a card was sent to print before the overlay module has heated up, the printer will pick the card but will not print or apply overlay until the overlay module has heated up.

Who To Call For Assistance If any contents of the box are missing, contact your distributor or reseller. Pamela Bates Level 2 Expert Answers. Clean the printhead Power off the printer, and disconnect it from the power source. You cannot change operational settings using a PC connected through a network.

Don’t show me this message again. D-2 Magnetic Stripe settings used by the Magna Class printer